WADEO Rain Barrel Connector Kit, Rain Barrel Linking Kit, with Two 12 Inch Hoses and Four Brass Bulkhead Tank Fittings
Function: WADEO rain linking kit is designed for irrigation with rain
barrel, not for potable water, not lead free compliant. Collect and
conserve rain water, reduce your water bill and use environmentally
friendly methods to water your plants and complete your outdoor chores.
Easy to install.You only need to drill a 27mm or 1-1/16 to 1-1/8 inch
hole to install, fix the brass fittings and connect the two barrels by
pipe. Fit up to 15mm thickness wall.
Increase Water Storage Capacity: Overall length of the rain barrel
connector hose is 12 inches, it can be easily connected to two rain
barrels, letting you increase your rainwater collection capacity. so
that form a water collection system which is especially helpful during
the dry season.
Package Included: Four Brass Bulkhead Tank Fittings(3/4″male thread),
Two 3/4” Hoses(with 2 Female Garden Hose Connectors). The thread of the
bulkhead is longer than the hose’s, so you can install it on rain
barrels of different thickness.
Attention: Not for potable water, not lead free compliant.
Installation Procedure
Step 1: Drill 1-1/8inch hole.
Step 2:Drop the fitting male piece inside.
Step 3: Pick up the fitting from outside.
Step 4: Tighten the nut.
Step 5:Connect the hose to the two rain buckets.
This product contains lead, a chemical known to the State
of California to cause cancer and birth defects or other reproductive
harm. Wash hand after use.
Longer Length ( 12 inches )
Overall length of hose is 12 inches, it can easy to connect
two rain barrels, letting you increase your rainwater collection
capacity.
Easy to install
You only need to drill a 27mm hole, fix the brass fittings and connect the two barrels by pipe.
Specification
Material：PVC, Brass
length : 12 inches
Weight : 255g
2 Packs